volver

Carbon Monoxide Detector Compact

Referencia: DMDP-500

Description

DETNOV's 500 series of detectors form part of the CMD-500 CO detection system. These have been developed and certified according to UNE 23300:1984 regulation and the Spanish Technical Building Code [Código Técnico de Edificación]

The DMDP-500 CO detector has been developed using the latest technological advances. Their novel design makes this range ideal for any type of installation and especially for those where functionality and a high protection index is needed.

The electrochemical cell and the algorithms used to detect the concentration of CO enable the DMDP-500 to provide high reliability and precision in CO detection. The DMD-500 has 1 ppm resolution and the detector's response time is less than 10 seconds.

CO detectors are insensitive to polarity and are connected to the CMD-500 carbon monoxide control panels through two wires. Any wiring topology is supported to adapt the system to the installation's requirements. The connection line can support up to 32 CO detectors with a maximum length of 2 km.

The DMDP-500 CO detector is designed to be used in places where CO detection points must be placed on the wall, and in places where a high protection index is needed.

Features

     UNE 23300:1984 approved
     Certificate number LOM 08MOGA3532
     Two-wire connection without polarity
     Electrochemical cell
     1 ppm resolution
     10 second response time
     200 m2 protected area (limited by regulation)

Aplications

Car parks or other places where concentrations of CO can accumulate and a high protection index is required.

Technical features

Detector
Technology: Electrochemical cell
Operating life: 5 years
Resolution: 1 ppm
Response time: 10 seconds
Storage temperature: From -10ºC to +80ºC
Protected area: 200 m2 limited by regulation

Connections
2 x 1.5 mm2 twisted and shielded cable to Z-200 base

Environment
Operating temperature: From -5ºC to +40ºC
Relative humidity: 95% without condensation
IP Index: IP54

Physical features
Detector: 93 mm x 93 mm x 55 mm
Material: ABS

Approvals
Regulation-certified system according to UNE 23300:1984
Official testing laboratory Official laboratory J. M. Madariaga
Certificate number LOM 08MOGA3532

Dimensions

Detector: 93 mm x 93 mm x 55 mm

Documents

You must be registered to access this section

CMD-500_LOM-08MOGA3532.pdf

DMDX-500_Manual_ES_FR_EN_IT.pdf

CMD-500_CE.pdf