Referencia: TRMD-501
The TRMD-501 is the card for connecting up to 3 speed regulators to control their corresponding motors and obtain optimum performance of the extraction motor, saving on the electricity consumption.
The TRMD-501 is focused on minimizing the power consumption of the overall system, and also reduces the noise level of the air renewal group.
The TRMD-501 card implements the MODBUS protocol which allows to monitor and control the system with a SCADA software.
■ 3 outputs to control the engine speed. One by CO module
■ 24V auxiliary voltage available in the main board
■ 24V battery voltage available
■ Ethernet gateway output
Speed regulation card
Maximum inverters: 3
Inverters control signal: 0 - 10V
Connections
2 x 1.5 mm2 twisted and shielded cable
Environment
Operating temperature: From -10ºC to 60º
Relative humidity: 95% without condensation
Gateway
Ethernet connection
You must be registered to access this section
CMD-500_LOM-08MOGA3532.pdf
TRMD-50X_Manual_Instalacion_ES_FR_EN_IT.pdf
CMD-500_CE.pdf
TRMD-501_Manual_Usuario_ES_EN.pdf