volver

Addressable Module 2 Powered Supervised Relay with Isolator

Referencia: MAD-432-I

Description

The range of MAD-400-I modules has been developed to offer a wide and complete range of input and output ports to be used with Detnov's CAD-150 family of analogue fire control panels. These modules let you manage a wide variety of situations, by monitoring and acting according to the installation's requirements.

The MAD-400-I modules have been designed to facilitate their installation process, and they may be installed using screws or fitted into a DIN rail. Each module is equipped with removable terminal blocks and a LED status indicator. The addressing of the modules is carried out through the PGD-200 programmer.

The MAD-431-I and MAD-432-I modules provide 1 or 2 supervised 24V outputs which may be configured through a micro-switch as supervised voltage outputs or a supervised sounder outputs. When they are configured as a sounder output, switching the sounder control panel's keys on and off will control the modules by switching the outputs of the modules on and off.

The MAD-431-I and MAD-432-I modules require a 24V auxiliary power supply to supply the loa

Features

     Simple installation on the wall or fitted into a DIN rail
     Non-polarity supported
     Addressing through a programmer
     Stable communication protocol with immunity to noise
     Requires an auxiliary 24V power supply
     Connections through removable terminal blocks, and simple fitting of the cable
     EN54-18 and EN54-17 approved

Aplications

The MAD-431-I and MAD-432-I modules are ideal for connecting conventional sounders to the analogue system, and provide savings in the total installation cost. They are ideal for activating any device which requires 24V.

Technical features

Module
Loop features:
   Operating voltage: From 22 to 38VDC
   Quiescent current consumption: < 300 μA
   Alarm current consumption: < 3 mA
Auxiliary power supply features:
   Operating voltage: 24VDC
   Quiescent current consumption: < 5 mA
   Maximum alarm current consumption: 1A
Zone output features:
   Operating voltage: 24VDC
   QuQuiescent current consumption: < 5 mA
   Maximum current consumption: 1A

Connections
2 x 1.5 mm2 twisted and shielded cable
Environment
Operating temperature: From -10ºC to +70ºC
Relative humidity: 95% without condensation
IP Index: IP40

Physical features
Size: 100 mm x 82 mm x 23 mm
Size with removable terminal: 100 mm x 100 mm x 23 mm
Material: ABS

Approvals
EN54-18 and EN54-17
Certificate number: 0370-CPR-1864

Dimensions

Size: 100 mm x 82 mm x 23 mm
Size with removable terminal: 100 mm x 100 mm x 23 mm

Documents

You must be registered to access this section

MAD-432-I_0370-CPR-1864_EN.pdf

MAD-432-I_01_Certificado_CE.pdf

MAD-432-I_14-0370-CPR-1864.pdf