volver

Addressable Module 230VAC Free Contact Relay Output

Referencia: MAD-481

Description

The range of MAD-400 modules has been developed to offer a wide and complete range of input and output ports to be used with Detnov's CAD-150 family of analogue fire control panels. These modules let you manage a wide variety of situations, by monitoring and acting according to the installation's requirements.

The MAD-400 modules have been designed to facilitate their installation process, and they may be installed using screws or fitted into a DIN rail. Each module is equipped with removable terminal blocks and a LED status indicator. The addressing of the modules is carried out through the PGD-200 programmer.

The MAD-481 module provides 1 free contact relay output to switch loads of up to 230VAC and 5A on and off. It provides an independent NC circuit and an independent NO circuit.

The MAD-481 module is a loop-powered device.

Features

     Simple installation on the wall or fitted into a DIN rail
     Non-polarity supported
     Addressing through a programmer
     Stable communication protocol with immunity to noise
     Connections through removable terminal blocks, and simple fitting of the cable

Aplications

The MAD-481 module is ideal for switching any device on and off through the communication loop, without the need to use an extra industrial contactor.

Technical features

Module
Loop features:
   Operating voltage: From 22 to 38VDC
   Quiescent current consumption: < 300 μA
   Alarm current consumption: < 3 mA
Relay contacts: 5A at 230VDC

Connections
2 x 1.5 mm2 twisted and shielded cable

Environment
Operating temperature: From -10ºC to +70ºC
Relative humidity: 95% without condensation
IP Index: IP40

Physical features
Size: 100 mm x 82 mm x 23 mm
Size with removable terminal: 100 mm x 100 mm x 23 mm
Material: ABS

Dimensions

Size: 100 mm x 82 mm x 23 mm
Size with removable terminal: 100 mm x 100 mm x 23 mm

Documents

MAD-481_Manual_ES_FR_EN_IT.pdf

MAD-481_CE.pdf